Dishwasher displays F5; unit may not drain or may leave water in the bottom of the tub.

Safety first: Turn off power at the breaker and be prepared for water spillage when disconnecting hoses.

• Check external drain path: Inspect the air gap and sink/disposer connection for clogs. Clear any debris and ensure the disposer knockout plug has been removed.
• Inspect drain hose: Detach the hose at the sink/disposer and flush with hot water. Look for kinks or crushed sections behind the dishwasher.
• Access drain pump: Remove the toe-kick and tilt or pull the dishwasher out slightly. Locate the drain pump on the sump. Remove the pump and check for debris in the impeller housing.
• Test pump: With a multimeter, check pump motor resistance. If open or if the pump hums but does not spin when powered, replace the GE Café drain pump.
• Control board: If a known-good pump does not receive power during drain, the main control board may be defective.