GE Profile Start Inhibit / Door or Control Lock Condition

Dishwasher has power but will not start cycle; Start button beeps or flashes and cycle does not begin.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Door not fully latched, Control lock (child lock) enabled, Faulty door latch switch, Unresponsive Start button on UI

How to Fix / Troubleshooting

Safety: Turn off power before removing control panel or latch components.

Steps:

  • 1. Confirm door closure: Close the door firmly until you hear a click. Ensure racks or utensils are not blocking the door.
  • 2. Check for control lock: Many GE Profile models have a lock feature. Look for a lock icon on the display. To toggle, press and hold the designated key (often Heated Dry or Lock) for 3–5 seconds.
  • 3. Try a different cycle: Select another cycle and press Start to rule out a specific program issue.
  • 4. Inspect door latch: If the unit still will not start, remove the inner door panel and test the latch switch for continuity when closed. Replace the latch assembly if faulty.
  • 5. UI issues: If the Start button does not respond but others do, the user interface board may need replacement.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Door Latch Assembly
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements