GE Profile Wash Motor Error

Dishwasher displays F8; may indicate a circulation pump or motor fault.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Seized wash motor, Open motor winding, Loose wiring, Control board motor driver failure

Safety: Turn off power and water before working under the dishwasher.

Steps:

1. Listen for wash motor: During wash, if you hear only humming or silence, suspect the motor.
2. Inspect wiring to motor: Ensure connectors are tight and not burned.
3. Test motor windings (advanced): Use a multimeter to check for continuity.
4. Replace wash motor: Install a new circulation pump motor assembly if defective.

If F8 persists, the main control board may need replacement.

Hard 4/5

Circulation Pump Motor

Check Price on Amazon

We may earn a commission from links on this page.