Grundig
Door Seal or Spray Pattern Leak
Dishwasher leaks water from the bottom front of the door during the wash cycle.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn or damaged door gasket, Blocked or misdirected lower spray arm, Overfilling due to level sensor issue, Loose door panel or misaligned hinges
How to Fix / Troubleshooting
Safety first: Disconnect power and close the water tap. Mop up any spilled water to prevent slipping.
- Inspect door gasket: Open the door and examine the rubber gasket around the tub opening for tears, flattening, or gaps. Replace if damaged.
- Check lower spray arm: Remove the lower spray arm and inspect for cracks or splits that could cause jets to spray directly at the door. Replace if damaged.
- Clean spray arm jets: Clear any blocked jets that may be redirecting water toward the door corners.
- Check door alignment: Ensure the door closes evenly and is not twisted. Tighten hinge screws if loose.
- Verify water level: If the water level is excessively high, inspect the pressure switch and inlet valve for faults causing overfilling.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements