Hobart dishwasher fills and heats but does not drain at the end of the cycle; water remains in the tank.

Safety first: Disconnect power before reaching into the tank or sump.

• Clean drain strainer: Remove and thoroughly clean the drain strainer and any scrap baskets to ensure water can reach the drain intake.
• Inspect sump area: Look for debris, labels, or broken glass around the drain intake. Remove obstructions with gloves.
• Check drain hose: Verify the drain hose is not kinked or blocked. Detach the hose from the building drain and flush it with water if necessary.
• Test drain function: Restore power and run a drain or cancel cycle. If the pump hums but does not move water, the impeller may be jammed or the pump failed.
• Replace pump/valve if needed: Persistent no-drain conditions after cleaning usually require replacement of the drain pump or drain valve assembly.