E19
Hoonved
Overcurrent / Motor or Heater Overload
E19 displayed; machine may show abnormal current draw or trip breakers when starting pumps or heaters.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Shorted wash pump motor, Shorted heating element, Damaged wiring causing short to chassis, Faulty overload protection device
How to Fix / Troubleshooting
Safety first: Immediately disconnect power if breakers trip or burning smells are present. Do not repeatedly reset breakers.
- Visual inspection: Open access panels and look for burnt wires, melted connectors, or signs of arcing near the wash pump, drain pump, and heating elements.
- Isolate components: Disconnect suspected components (e.g., wash pump, heater) one at a time and test with a multimeter for resistance to ground. Any component showing a short to chassis must be replaced.
- Check overloads: Some Hoonved models have thermal overloads on motors. Reset if tripped, but investigate cause of overload (blocked pump, seized bearings).
- Professional service: Due to the risk of fire and electric shock, overcurrent faults should generally be handled by a qualified technician.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Wash Pump Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements