Hoonved Low Rinse Pressure

Rinse water pressure at the spray arms is low; final rinse is weak.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Blocked rinse nozzles, Low mains water pressure, Partially blocked rinse solenoid valve, Scaled rinse boiler outlet

Safety first: Turn off power and water before removing rinse components.

Clean rinse arms: Remove and clean all rinse nozzles thoroughly.
Check mains pressure: Verify adequate water pressure at the supply. If low, consult a plumber.
Inspect rinse valve: Remove the rinse solenoid valve and clean its internal filter and seat.
Descale boiler outlet: If accessible, descale the outlet and piping from the boiler to the rinse arms.

Medium 3/5

Rinse Solenoid Valve

Check Price on Amazon

We may earn a commission from links on this page.