Hoover
Detergent Dispenser Not Opening / Spray Coverage Issue
Detergent tablet remains in the dispenser at the end of the cycle.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty dispenser latch or solenoid, Spray arm blocked or misaligned, Large dish blocking dispenser door, Low water pressure from pump
How to Fix / Troubleshooting
Safety first: Switch off power before removing the inner door panel.
- Check loading: Ensure large plates or trays are not placed directly in front of the dispenser door.
- Inspect spray arms: Clean and ensure they rotate freely; blocked jets can prevent water from reaching the dispenser.
- Test dispenser door: With the door open, manually open and close the dispenser. It should latch firmly and spring open easily.
- Access dispenser: Remove the inner door panel to access the dispenser assembly. Check the solenoid or wax motor and wiring.
- Replace dispenser: If the mechanism is broken or the solenoid is open-circuit, replace the complete detergent dispenser assembly.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Detergent Dispenser Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements