Hoover
No Drain / Standing Water
Dishwasher fills and washes but does not drain; water remains in the bottom at the end of the cycle.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blocked sump filter, Clogged drain hose, Obstructed drain pump impeller, Faulty drain pump motor
How to Fix / Troubleshooting
Safety first: Unplug the appliance. Water may spill when hoses are removed.
- Clean filters: Remove and thoroughly clean all filters in the base of the tub.
- Check pump area: Remove the pump cover in the sump and inspect the impeller for debris. Remove any obstructions.
- Inspect drain hose and sink trap: Detach the hose from the sink trap, clear any blockage, and flush the hose with hot water.
- Test pump: Run a drain cycle and listen. If the pump is silent or only hums, replace the drain pump.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements