Hotpoint
Poor or No Drainage
Dishwasher does not drain at end of cycle; standing water remains in the bottom of the tub.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blocked sump filter,Clogged drain hose or sink trap,Obstructed drain pump impeller,Failed drain pump
How to Fix / Troubleshooting
Safety first: Disconnect power. Scoop out as much standing water as possible with a cup or sponge.
- Clean filters: Remove and thoroughly clean the coarse and fine filters.
- Inspect sump: Check for glass, food, or labels blocking the sump area.
- Check drain hose and sink trap: Detach the hose from the sink trap or disposal and clear any blockage. Ensure the hose has a proper high loop to prevent backflow.
- Inspect drain pump: Access the pump from the base, remove any debris from the impeller, and test the motor.
Replace the drain pump if it does not run or is electrically open.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements