Hotpoint No Water Fill

Dishwasher does not fill with water; you hear a click but no water enters, or it times out and stops.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Closed water tap,Blocked inlet filter,Defective water inlet valve,Faulty flow meter (if fitted)

Safety first: Turn off power and water.

Confirm water supply: Ensure the supply tap is open and water pressure is adequate.
Clean inlet filters: Remove and rinse the inlet hose filters.
Check hose routing: Ensure the hose is not kinked or crushed.
Test inlet valve: Measure coil resistance and replace the valve if faulty.

If the valve is good but still not opening, the control board or wiring may be at fault.

Medium 3/5

Water Inlet Valve

Check Price on Amazon

We may earn a commission from links on this page.