Dishwasher shows F02; often related to water inlet or fill problems on some Hotpoint models.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Closed or restricted water tap,Blocked inlet filter,Defective water inlet valve,Inlet hose kinked or frozen

Safety first: Turn off power and water.

Confirm water supply: Ensure the supply tap is fully open and that household water pressure is adequate.
Clean inlet filters: Remove the inlet hose and clean the mesh filters at both ends as described for A02.
Inspect hose routing: Make sure the hose is not kinked behind the machine or trapped under cabinetry.
Test inlet valve: Check coil resistance and replace the valve if open or shorted.

If F02 persists after these checks, further diagnosis of the control board and wiring may be required.

Medium 3/5

Water Inlet Valve

Check Price on Amazon

We may earn a commission from links on this page.