Dishwasher shows F08; may be associated with water level or overflow issues on some models.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Water leak into base pan,Stuck float switch,Blocked pressure chamber,Stuck inlet valve

Safety first: Unplug the dishwasher and close the water tap.

Check base pan: Remove the kick plate and inspect for water. If present, dry the base and locate the source of the leak as described for A01.
Inspect float switch: Ensure the anti-flood float moves freely and is not jammed by debris.
Check inlet valve: Confirm that water stops entering when the machine is off; replace the valve if stuck open.

Persistent F08 indicates an unresolved leak or sensor issue and should be addressed before further use.

Hard 4/5

Anti-Flood Float Switch

Check Price on Amazon

We may earn a commission from links on this page.