Dishwasher trips the household circuit breaker or RCD during operation.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Critical safety warning: Repeated tripping indicates a potentially dangerous fault. Disconnect the appliance and do not repeatedly reset the breaker.
Visual inspection (only if competent):
- Remove lower panels and inspect for signs of water leaks onto electrical parts.
- Check the mains cable and interference filter for burn marks or damage.
Common culprits:
- Heater: often trips during heating phase. Test heater insulation with a megohmmeter if available; replace if leaking to earth.
- Pumps: if trip occurs at start of wash or drain, suspect circulation or drain pump.
Because of the shock risk, diagnosis and repair of earth leakage faults should be carried out by a qualified electrician or appliance technician.
Repair Difficulty
Required Part
We may earn a commission from links on this page.