Insignia
Rinse Aid Dispenser Failure
Rinse aid is not dispensing; dishes have spots and the rinse aid level never seems to drop.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Clogged rinse aid outlet, Failed dispenser mechanism, Incorrect rinse aid setting, Control not energizing dispenser
How to Fix / Troubleshooting
Safety first: Disconnect power before removing the inner door panel.
- 1. Verify settings: Ensure the rinse aid dosage setting is not set to zero on the control panel or mechanical dial.
- 2. Clean dispenser: Wipe around the rinse aid cap and outlet. Remove the cap and clean any hardened residue.
- 3. Test with water: Fill the dispenser with water and run a cycle. Check if the level drops, indicating the valve opens.
- 4. Access dispenser assembly: Remove the inner door panel and inspect the dispenser for cracks or disconnected wiring.
- 5. Replace dispenser: If the mechanism is not opening, replace the detergent/rinse aid dispenser assembly with an Insignia-compatible part.
Proper rinse aid function is important for drying and spot-free results, especially in hard water areas.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Detergent Dispenser Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements