Jackson
Final Rinse Flow Failure
Jackson dishwasher final rinse arms do not spray, but wash arms operate normally.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Closed or clogged rinse supply valve, Blocked rinse line strainer, Failed rinse solenoid valve, Clogged rinse spray nozzles
How to Fix / Troubleshooting
Safety first: Disconnect power and close water supply before opening any rinse line components.
- Verify rinse supply: Ensure the building’s hot water supply to the rinse/booster is on and at correct pressure.
- Clean rinse strainer: Locate and remove the rinse line strainer. Clean out debris and reinstall.
- Test rinse solenoid valve: Check for voltage at the valve during final rinse (qualified personnel only). If energized but not opening, replace the valve.
- Clean rinse arms: Remove final rinse arms and clear all nozzles of scale and debris.
Confirm strong, even spray from all rinse nozzles during a test cycle after repair.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Rinse Solenoid Valve
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements