Dishwasher displays F5E1; door will not latch properly or cycle will not start and control indicates door open.

Safety: Turn off power at the breaker before working on the door latch.

• Check door closure: Ensure racks are fully pushed in and no large items are blocking the door. Try closing the door firmly; listen for a solid click.
• Inspect latch strike: Examine the metal strike on the tub frame. If bent or loose, adjust or tighten screws so the latch engages fully.
• Door switch test: Remove the inner door panel to access the latch assembly. With power off, disconnect the door switch wires and test for continuity when the latch is closed. Replace the latch/switch assembly if it does not close electrically.
• Check for wear: If the plastic latch hook is worn or broken, replace the entire door latch assembly with a JennAir-compatible part.

Note: Do not slam the door; this can damage the latch and control panel over time.