Dishwasher shows F9E1; cycle may stop and drain, or unit may not start due to detected low water pressure.

Safety: Turn off power and water before disconnecting lines.

• Verify valve position: Ensure the under-sink shutoff valve is fully open.
• Check supply line: Inspect the dishwasher supply line for kinks or crushing. Replace if damaged.
• Clean inlet screen: Remove and clean the inlet valve screen as described in F4E1.
• House plumbing: If water flow at the sink is weak, consult a plumber to correct the supply issue.
• Flow meter: If plumbing is good but F9E1 persists, replace the flow meter if your JennAir model uses one.

Tip: Avoid using other heavy water-consuming appliances (like washers) simultaneously if your supply pressure is marginal.