Kenmore
Drainage Failure
Dishwasher does not drain; water remains in bottom after cycle.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Clogged drain hose, Blocked air gap, Obstructed sump or filter, Failed drain pump
How to Fix / Troubleshooting
Safety first: Turn off power and be prepared for water spillage.
- Remove standing water: Use a cup and towels to remove most of the water from the tub.
- Clean filters and sump: Remove and rinse filters; clear debris from the sump inlet to the drain pump.
- Check air gap and hose: Clean the air gap and flush the drain hose to remove clogs.
- Test drain pump: Listen for pump operation; if silent or humming only, access and test the pump. Replace if defective.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements