Kenmore Circulation Failure

Dishwasher fills with water but does not wash; spray arms do not move.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed circulation pump motor, Blocked pump impeller, Clogged spray arms, Low water level

Safety first: Disconnect power and water.

Check water level: After fill, open the door; water should be just below the heating element. If low, inspect inlet valve and float.
Clean spray arms: Remove upper and lower spray arms and flush under running water. Use a toothpick to clear blocked jets.
Inspect circulation pump: Access the pump from below, check for debris in the impeller, and test motor continuity. Replace the pump if seized or open.

Hard 4/5

Circulation Pump Motor

Check Price on Amazon

We may earn a commission from links on this page.