Kenmore Start Circuit / Door Interlock Issue

Dishwasher powers on but will not start cycle when Start is pressed.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Door not fully latched, Faulty door latch switch, Defective Start button on UI, Control board not recognizing input

Safety first: Turn off power before opening the door panel.

Confirm door closure: Ensure the door closes firmly and latches. Adjust the strike if needed.
Try different cycles: Select another cycle and press Start to rule out a specific program issue.
Test door switch: Access the latch assembly and test continuity when the latch is engaged. Replace if it does not close the circuit.
Check Start button: If other buttons respond but Start does not, the UI panel may be faulty and require replacement.

Medium 3/5

Door Latch Assembly

Check Price on Amazon

We may earn a commission from links on this page.