Service code 6-1 (or 6.1) appears; no water entering dishwasher.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Closed water supply valve, Failed water inlet valve, Clogged inlet screen, Faulty float switch stuck in full position

Safety First: Disconnect power and close the water supply valve.

Steps:

Confirm supply: Verify the under-sink shutoff valve is open and the supply hose is not kinked.
Check float: Inside the tub, locate the float (if equipped) and ensure it moves freely up and down. Clean any debris around it.
Clean inlet valve screen: Remove the lower panel, disconnect the water line, and clean the inlet valve screen.
Test and replace valve: If the valve coil is open or the valve does not open when energized, replace the water inlet valve.

Medium 3/5

Water Inlet Valve

Check Price on Amazon

We may earn a commission from links on this page.