Service code 6-2 (or 6.2) appears; water inlet valve electrical problem.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open or shorted inlet valve coil, Loose wiring to valve, Faulty control board driver

Safety First: Disconnect power before testing electrical components.

Steps:

Inspect wiring: Check the harness to the inlet valve for loose or corroded connectors.
Measure coil resistance: Use a multimeter to test the inlet valve coil. Replace the valve if the coil is open or shorted.
Control test: If the valve is good but not receiving voltage during fill, the main control board may be defective and require replacement.

Hard 4/5

Water Inlet Valve

Check Price on Amazon

We may earn a commission from links on this page.