F2E1
Maytag
User Interface Keypad Stuck or Shorted
Control panel unresponsive or random buttons appear to be pressed; F2E1 stuck key error may display.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Moisture in touchpad, Failed user interface panel, Loose or oxidized ribbon cable between UI and control
How to Fix / Troubleshooting
Safety First: Disconnect power at the breaker before removing the door panel.
Steps:
- Power reset: Turn off power for 5 minutes, then restore. Try to operate the panel again.
- Inspect for moisture: Check around the control panel and vent area for signs of steam or water intrusion. Dry the area thoroughly and allow several hours with the door open to air out.
- Access the user interface: Remove the inner door screws and carefully separate the inner and outer door panels. Locate the user interface (UI) board and ribbon cable.
- Check connections: Disconnect and reconnect the ribbon cable between the UI and main control. Look for corrosion or bent pins.
- Replace UI panel if needed: If certain keys remain unresponsive or the error returns, replace the user interface control panel assembly specific to your Maytag model.
Note: Avoid spraying cleaners directly on the control panel; spray onto a cloth instead to prevent future moisture damage.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
User Interface Control Panel
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements