F8E2
Maytag
Restricted Drain Flow
Dishwasher drains intermittently or not completely; may show F8E2 drain slow error.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Partial blockage in drain hose, Food debris in sump outlet, Improper drain hose installation (no high loop), Weak drain pump
How to Fix / Troubleshooting
Safety First: Disconnect power and be prepared for water spillage when disconnecting hoses.
Steps:
- Clean filters and sump: Remove and clean the filter assembly and inspect the sump outlet where the drain pump connects.
- Verify hose routing: Ensure the drain hose has a high loop under the counter or is connected to an air gap to prevent backflow.
- Flush hose: Disconnect the hose from the sink/disposer and from the dishwasher (if accessible) and flush thoroughly with water.
- Check pump performance: Run a drain cycle with the hose directed into a bucket and observe flow. Weak flow may indicate a failing pump that should be replaced.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements