F14
Miele
Circulation Pump Fault
Dishwasher stops with F14; circulation pump does not run or water is not being sprayed.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blocked circulation pump impeller, Seized circulation pump motor, Defective circulation pump capacitor, Wiring fault to circulation pump
How to Fix / Troubleshooting
Safety: Unplug the appliance and turn off water. Allow the machine to cool before working near the heater.
- Check for blockage: Remove filters and inspect the sump area for foreign objects that could jam the circulation pump intake.
- Access pump: Tilt the dishwasher and remove the bottom access panel to reach the circulation pump assembly.
- Inspect impeller: Rotate the impeller by hand (with power disconnected). It should turn smoothly. Remove any debris.
- Electrical test: Check the pump motor windings and start capacitor with a multimeter. Replace the circulation pump assembly if the motor is open, shorted, or mechanically seized.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Circulation Pump Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements