F63 appears; AutoOpen door function may not work correctly at end of cycle.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Defective AutoOpen actuator motor, Jammed door release mechanism, Wiring fault to actuator

Safety: Disconnect mains power before working on the door.

Check door movement: Ensure the door opens and closes smoothly by hand and is not obstructed by cabinetry.
Inspect actuator: Remove the outer door panel to access the AutoOpen actuator. Check for broken levers or jammed linkages.
Test wiring: Verify the actuator connector is secure and wires are intact.
Replace actuator: If the mechanism is intact but does not operate during test cycles, replace the AutoOpen actuator assembly.

Medium 3/5

AutoOpen Door Actuator

Check Price on Amazon

We may earn a commission from links on this page.