E7
Monogram
Door Latch / Door Switch Error
Dishwasher displays E7; may not start or may stop unexpectedly.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Misaligned door latch on Monogram dishwasher, Failed door switch, Broken latch mechanism, Loose latch wiring
How to Fix / Troubleshooting
Safety: Turn off power before adjusting or replacing the latch.
- Inspect door closure: Ensure the door closes firmly and evenly. Check for racks or dishes preventing full closure.
- Check latch strike alignment: The metal strike on the tub should align with the latch on the door. Adjust the strike screws slightly if needed so the latch engages fully.
- Test door switch: Remove the inner door panel to access the latch assembly. Check wiring and test the door switch for continuity when the latch is closed.
- Replace damaged latch: If the latch is cracked or the switch is faulty, replace the latch assembly with a compatible Monogram part.
After repair, restore power and confirm the E7 code is cleared and the dishwasher starts reliably.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Door Latch Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements