Dishwasher displays F2; may indicate a problem with the water level or overfill.

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Stuck float in Monogram tub, Faulty float switch, Control board misreading level, Inlet valve stuck open

How to Fix / Troubleshooting

Safety: Turn off power and water supply immediately if overfilling is suspected.

Check float movement: Ensure the float moves freely and is not obstructed by debris or dishes.
Test float switch: Access from below and check continuity while moving the float.
Inspect inlet valve: If water continues to enter with power off, the inlet valve is mechanically stuck open and must be replaced.

After correcting the cause, dry any water from the base pan, restore power, and test operation. Persistent F2 errors may require control board replacement.

Repair Difficulty

Hard 4/5

Required Part

Water Inlet Valve

Check Price on Amazon

We may earn a commission from links on this page.