Monogram Water Inlet / Flow Fault

Dishwasher displays F6; may indicate a water inlet or flow problem.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Partially closed shutoff valve, Clogged inlet screen on Monogram valve, Faulty flow meter (if equipped), Failing inlet valve

Safety: Turn off power and water before disconnecting hoses.

Verify water supply: Confirm strong flow at the sink and fully open shutoff valve.
Clean inlet screen: Remove sediment from the valve screen.
Inspect flow meter (if present): Check for debris or damage in the flow sensor housing.

Replace the inlet valve or flow meter if defective. Persistent F6 errors may require control board diagnosis.

Medium 3/5

Water Inlet Valve

Check Price on Amazon

We may earn a commission from links on this page.