E14
Mora
Flow Meter Signal Missing / Incorrect
Dishwasher displays E14 and may not fill correctly or may stop shortly after starting.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Defective flow meter, Blocked flow chamber, Loose connector at flow sensor, Damaged wiring harness
How to Fix / Troubleshooting
Safety first: Disconnect power and close the water tap.
- Clean inlet filters: Remove and clean the mesh filters at the tap and at the dishwasher inlet to ensure proper flow.
- Access flow meter: Remove the side panel to locate the flow meter in the water distribution system.
- Check rotor movement: If accessible, visually confirm that the rotor inside the flow meter can spin freely. Clean out any debris.
- Inspect wiring and connector: Ensure the flow meter connector is firmly seated and the wires are not damaged.
- Replace if necessary: If cleaning and wiring checks do not resolve E14, replace the flow meter assembly.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Flow Meter Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements