Mora
Door Seal / Spray Pattern Leak
Water leaks from the bottom front of the dishwasher door during operation.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn or damaged door gasket, Blocked spray arm jets directing water at door, Overfilling due to level sensor issue, Loose door panel screws
How to Fix / Troubleshooting
Safety first: Unplug the dishwasher and turn off the water supply before inspecting for leaks.
- Inspect door gasket: Open the door and examine the rubber gasket around the tub opening for tears, flattening, or gaps. Replace if damaged.
- Clean gasket and mating surfaces: Wipe the gasket and door edges with warm soapy water to remove grease and debris.
- Check spray arms: Ensure spray arm jets are not blocked or damaged in a way that directs a strong jet at the door. Clean or replace arms as needed.
- Verify loading: Make sure large items are not pushing against the door or deflecting spray toward the bottom of the door.
- Test for overfill: If water level seems too high, investigate level sensor and inlet valve as described for overfill errors.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements