E13
Rosières
Flow Meter / Water Intake Measurement Error
E13 appears; dishwasher may stop during fill or rinse phases
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Defective flow meter in inlet assembly, Blocked or scaled flow meter turbine, Loose connector to flow sensor, Control board misreading pulses
How to Fix / Troubleshooting
Safety first: Disconnect power and close the water tap before removing the inlet hose or side panels.
- Check inlet filters: Clean the mesh filter at the water inlet valve to ensure proper flow.
- Access flow meter: On many Rosières models, the flow meter is integrated into the side water distribution system or inlet valve body. Remove the side panel to locate it.
- Inspect for scale: If the flow meter housing is translucent, look for heavy limescale. Descale or replace if the turbine cannot spin freely.
- Check wiring: Ensure the small connector from the flow meter to the main harness is firmly attached.
- Replace if necessary: If E13 persists after cleaning and the water supply is good, replace the flow meter assembly with the correct Rosières part.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Water Inlet Flow Meter
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements