Dishwasher displays 9E and may not fill or may stop early in the cycle.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Insufficient water supply, Clogged filter or sump, Faulty water level sensor, Air in pressure hose

Safety: Turn off power and water before service.

Check water supply: Ensure the inlet valve is fully open and the hose is not kinked.
Clean filter and sump: Remove and clean the Samsung filter and check the sump for debris that could affect water level sensing.
Inspect pressure hose: Verify the hose to the level sensor is not kinked and is properly attached. Remove and clear any trapped air or debris.
Replace level sensor: If 9E persists, replace the water level sensor/pressure switch.

Medium 3/5

Water Level Sensor / Pressure Switch

Check Price on Amazon

We may earn a commission from links on this page.