Sharp Door Gasket / Door Alignment Leak

Dishwasher leaks water from the bottom front edge of the door during the wash cycle.

Advertisements

Possible Causes

Worn or deformed door gasket, Blocked lower spray arm causing water to jet at door, Door not closing square due to misleveling, Damaged door inner panel lip

How to Fix / Troubleshooting

Safety first: Turn off power and avoid slipping on spilled water.

  • Inspect door gasket: Open the door and examine the Sharp door seal around the tub opening. Look for tears, flattening, or gaps, especially at the bottom corners.
  • Clean gasket and lip: Wipe the gasket and the mating surface on the tub with warm soapy water to remove grease and debris.
  • Check spray arm: Remove the lower spray arm and inspect for cracks or blocked jets that could direct water toward the door. Clean or replace if damaged.
  • Level the dishwasher: Use a spirit level to ensure the appliance is level side-to-side and slightly tilted back. Adjust the front feet as needed.
  • Replace gasket if needed: Pull out the old gasket and press a new Sharp-compatible door gasket firmly into the channel, ensuring it is fully seated at the corners.
Advertisements

Repair Difficulty

Easy 2/5

Required Part

Door Gasket
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements