Dishwasher shows E08 and water level appears too low; spray arms may not rotate properly.

Safety first: Disconnect power and close the water tap.

E08 indicates that the water level or circulation pressure is too low for proper operation.

• Step 1 – Check water supply:
  • Ensure the water tap is fully open.
  • Clean the inlet hose filter screen.
• Step 2 – Clean filters and sump:
  • Remove and thoroughly clean the filter assembly.
  • Ensure the filters are reinstalled correctly and fully seated to prevent air being drawn into the pump.
• Step 3 – Heat exchanger / water matrix:
  • Remove the left side panel.
  • Inspect the heat exchanger / water matrix for heavy limescale or sludge.
  • Flush with hot water and a descaling solution if necessary.
• Step 4 – Circulation pump check:
  • Listen during operation: if the pump sounds unusually loud or weak, it may be failing.
  • Access the pump from below and check for obstructions in the impeller area.
• Step 5 – Replacement:
  • If cleaning does not resolve E08 and circulation remains weak, replace the circulation pump assembly.

Running the dishwasher with low water level can damage the pump; address E08 promptly.