Dishwasher completes cycle but dishes are wet and not drying properly; condensation remains on walls and plastics.

Safety first: Disconnect power before accessing heater or fan components.

• Check rinse aid: Ensure the rinse aid reservoir is filled and the dosage setting is appropriate for your water hardness.
• Use appropriate program: Select a program with a full drying phase and avoid quick or eco cycles if you require maximum drying.
• Loading technique: Angle dishes so water can run off. Avoid placing plastic items flat where water can pool.
• Verify heating: Open the door immediately after a hot cycle; the air should feel warm. If not, investigate the heater circuit as per heating fault procedures.
• Check drying fan (if present): Listen for fan operation during the drying phase. If silent, test and replace the fan motor as needed.