V-ZUG Leakage / Anti-Flood Activation

Dishwasher displays F8 and may stop with water in the base tray.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Internal leak from hoses or pump, Door seal leaking, Base tray float switch activated, Cracked sump

Safety first: Turn off power and close the water tap immediately.

Inspect base tray: Remove toe-kick and check for water. Dry completely if present.
Check door seal: Inspect and clean the door gasket and bottom seal. Replace if torn or deformed.
Test for leaks: Run a short program while observing the underside for drips.
Stop if leak continues: Do not use the dishwasher until the leak source is repaired by a technician.

Hard 4/5

Door Gasket / Internal Hoses

Check Price on Amazon

We may earn a commission from links on this page.