Vestel
Start Inhibit / Door or Control Logic Fault
Dishwasher powers on but will not start a cycle; start button unresponsive or program cancels immediately.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty door lock switch, Stuck start button, Control panel membrane failure, Child lock function activated
How to Fix / Troubleshooting
Safety first: Unplug the appliance before removing the control panel.
Step-by-step checks:
- Check display for child lock: Some Vestel models show a key symbol when child lock is active. Consult the user manual to deactivate (usually by holding a specific button combination).
- Verify door closure: Ensure the door closes firmly. If you can start the cycle by pressing on the door, the door switch or latch is suspect.
- Inspect and test door switch: Remove the inner door panel, locate the door lock assembly, and test the switch with a multimeter. Replace if intermittent or open when latched.
- Control buttons: Check for stuck or unresponsive buttons on the fascia. If multiple buttons fail or respond erratically, the control panel PCB or membrane may need replacement.
After repair, run a short program to confirm that the machine starts reliably.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Door Lock Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements