F9E1
Whirlpool
Long Drain / Drain Time-Out
Dishwasher displays F9E1; unit drains for an unusually long time or times out; may not complete cycle.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Partial drain hose blockage, Slow sink drain, Obstructed pump impeller, Drain hose installed without proper high loop
How to Fix / Troubleshooting
Safety First: Turn off power before disconnecting hoses or pump.
- Verify drain hose routing: Ensure the drain hose has a high loop under the counter or is connected to an air gap to prevent backflow.
- Check sink and disposer: Make sure the sink drain and garbage disposer are clear and draining quickly.
- Clean pump and hose: Remove the lower filters and inspect the sump and pump inlet for debris. Disconnect the drain hose at the sink and flush it with water.
- Inspect drain pump: Access from below, remove any obstructions from the impeller, and test the pump. Replace if weak or noisy.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Drain Pump or Drain Hose
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements