Zanussi
Poor Wash Performance
Dishwasher runs but dishes come out dirty or with food residues.
Advertisements
Possible Causes
Clogged spray arm jets, Dirty filters, Low water temperature due to heater fault, Incorrect loading blocking spray arms
How to Fix / Troubleshooting
Safety first: Switch off the dishwasher before cleaning internal parts.
- Clean filters: Remove and wash all filters weekly to maintain flow.
- Clean spray arms: Remove upper and lower spray arms and clear all jets with a toothpick. Rinse thoroughly.
- Check loading: Avoid nesting bowls and stacking items so that water cannot reach surfaces. Ensure tall items do not block the spray arms.
- Verify heating: After 15–20 minutes of a hot cycle, open the door carefully to check if water is hot. If cold, investigate heater and NTC as described in heating faults.
- Use correct detergent: Use quality dishwasher tablets or powder and adjust dosage for water hardness.
Advertisements
Repair Difficulty
Easy
2/5
Advertisements