AEG
Drum Drive Failure
Dryer drum does not turn, but the machine powers on and may heat; humming noise may be heard.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Broken or slipped drive belt, Seized drum bearings, Jammed drum due to foreign object, Faulty drum motor
How to Fix / Troubleshooting
Safety first: Unplug the dryer before removing any panels.
- 1. Check drum rotation: Open the door and try to rotate the drum by hand. If it spins freely, the belt may be broken. If it is stiff or grinding, suspect bearing or obstruction issues.
- 2. Listen for motor: Start a cycle briefly; if you hear a humming sound but no rotation, switch off immediately to avoid motor damage.
- 3. Inspect belt: Remove the top and rear panel to check if the belt is intact and correctly positioned on the motor pulley and drum.
- 4. Look for obstructions: Check between the drum and front/rear felt seals for trapped items (e.g., bra wires, coins) that could jam the drum.
- 5. When to call a technician: Replacing the belt or motor and servicing bearings is typically a professional repair.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements