AEG
No Heat / Cold Drying
Dryer runs but produces no heat; clothes remain cold after the cycle, no error code shown.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed heating element, Tripped thermal cut-out, Faulty NTC sensor, Failed compressor (heat pump models)
How to Fix / Troubleshooting
Safety first: Disconnect mains power before inspection.
- 1. Confirm symptom: Run the dryer for 5–10 minutes, then stop and carefully feel the air inside the drum. If it is completely cold, heating is not working.
- 2. Clean filters and condenser: Blocked airflow can cause safety devices to trip. Clean lint filter and condenser/heat exchanger thoroughly.
- 3. Allow to cool and retry: If the thermal cut-out has tripped due to overheating, the dryer may resume heating after cooling down.
- 4. When to call a technician: If there is still no heat, the heater, NTC, or compressor should be tested and replaced by a professional.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Heating Element Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements