Dryer may not start or may stop with E53; sometimes associated with erratic motor speed.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Defective motor control triac or driver on PCB, Loose motor connector, Internal PCB track damage

Safety first: Disconnect mains power. PCB work involves high voltages.

1. Check motor connector: Access the motor and ensure the main multi-pin connector is fully seated and not heat-damaged.
2. Inspect PCB: Remove the control board housing and visually inspect for burnt components or cracked solder joints in the motor control area.
3. Do not attempt board-level repair unless qualified: In most cases, the entire control board is replaced.
4. When to call a technician: E53 generally requires professional diagnosis and control board replacement.

Professional Required 5/5

Main Control Board

Check Price on Amazon

We may earn a commission from links on this page.