Amana Drum Support or Idler Pulley Wear

Dryer drum turns but there is a loud squealing or screeching noise during operation.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Worn drum support rollers, Seized idler pulley, Dry or worn drum glides, Worn drum belt rubbing metal

How to Fix / Troubleshooting

Safety first: Unplug the dryer before disassembly. Wear gloves to protect from sharp edges.

  • Access drum supports: Remove the front panel and, if needed, the drum to access rollers, idler pulley, and glides.
  • Inspect rollers: Spin each drum roller by hand. Replace any that are noisy, flat-spotted, or seized.
  • Check idler pulley: Rotate the idler pulley. Replace if it squeals, wobbles, or feels rough.
  • Inspect drum glides: On models with front glides, check for worn-through pads. Replace as a set if worn.
  • Replace belt if worn: If the belt is cracked or glazed, replace it while the dryer is open.
  • Reassemble and test: Reinstall the drum and panels, then run a test cycle to confirm the noise is gone.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Drum Support Roller Kit
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements