Amana
No Start – Control or Safety Circuit Issue
Dryer will not start at all; no drum movement when Start is pressed, but lights may be on.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed door switch, Blown thermal fuse, Defective start switch, Open belt switch (on belt-sensing models)
How to Fix / Troubleshooting
Safety first: Unplug the dryer before testing components.
- Confirm power: Verify the dryer is plugged in and the breaker is not tripped.
- Check door switch: Listen for a click when closing the door. Test the switch with a multimeter and replace if it does not change state.
- Test thermal fuse: Access the blower housing and test the thermal fuse for continuity. Replace if open and correct any airflow issues.
- Inspect belt switch: On models with a belt switch, ensure the drive belt is intact and properly tensioned. Replace a broken belt or faulty switch.
- Test start switch: Remove the console and test the start button switch for continuity when pressed. Replace if defective.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements