F2
Amana
User Interface or Keypad Failure
Dryer display shows F2 and may not respond to button presses or may beep continuously.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Stuck or shorted keypad button, Loose UI ribbon cable, Failed user interface board, Moisture intrusion into console
How to Fix / Troubleshooting
Safety first: Unplug the dryer before opening the console.
- Check for stuck buttons: Press each button on the control panel several times to free any that may be stuck. Wipe the panel with a dry cloth.
- Inspect UI connections: Remove the console cover. Locate the user interface (UI) board and its ribbon cable to the main control. Reseat the ribbon cable and connectors.
- Dry out moisture: If the console appears damp (from steam or cleaning), allow it to dry completely for several hours before reassembly.
- Test operation: Reassemble the console, restore power, and check if the F2 code clears.
If F2 persists, the user interface board or console assembly will likely need replacement.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
User Interface Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements