F7
Amana
Motor or Motor Control Fault
Dryer displays F7 and may not start or may shut off unexpectedly.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed drive motor, Open motor winding, Loose motor harness connection, Defective motor relay on control board
How to Fix / Troubleshooting
Safety first: Unplug the dryer and, for gas models, shut off gas before servicing. Moving parts and sharp edges are present.
- Check drum movement: With the dryer unplugged, open the door and try to rotate the drum by hand. It should turn smoothly. If seized, inspect for jammed objects or failed drum support components.
- Inspect motor wiring: Remove the front or rear panel to access the drive motor. Check the harness connector for tightness and signs of overheating.
- Test the motor: Use a multimeter to check continuity of the motor windings per Amana specifications. Replace the motor if windings are open or shorted.
- Control relay check: If the motor tests good, the motor relay on the main control may be defective and the board may need replacement.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements