Dryer door is difficult to open after the cycle or pops open during operation.

Safety first: Turn off and unplug the dryer before adjusting hinges or latches.

• Inspect latch and strike: Check the latch on the door and the strike on the cabinet for wear or damage. Replace worn parts.
• Tighten hinge screws: Open the door and tighten all hinge screws on both the door and cabinet side.
• Adjust door alignment: If the door sags, slightly loosen the hinge screws, lift the door into correct position, and retighten.
• Check door seal: Inspect the gasket around the door for deformation that could cause excessive pressure. Replace if damaged.
• Test closure: Close the door several times to ensure smooth operation and that it stays closed during a test cycle.