Dryer leaks water onto the floor, usually at the front or bottom (condenser/heat pump models).

Safety first: Unplug the dryer. Mop up any water to prevent slipping.

• Check water tank:
  • Remove and empty the tank.
  • Ensure it is not cracked and that it seats fully when reinserted.
• Clean condensate path:
  • Remove the condenser and clean the housing.
  • Use a flexible brush or pipe cleaner to clear the drain channel leading to the tank.
• Inspect hoses: Check internal drain hoses for disconnection or cracks; reconnect or replace as needed.
• Test: Run a short cycle and monitor for leaks.

Note: If water appears to come from the door, check and clean the door seal and glass.